Cracked floor? Rust? Coils losing efficiency?

Your data center can't stop. Neither can the floor, the structure or the cooling.

Find out which coating system solves each problem in your data center, from the IT room to the HVAC-R coil, and talk to a WEG Coatings specialist.

  • Official WEG Coatings catalog
  • Systems for each data center area
  • Technical support from a specialist
Data center aisle with server racks

Which problem do you want to solve?

You don't always know the name of the solution. Pick what you see day to day and check what WEG Coatings recommends in each case.

?I don't know where to startTell us your scenario. A specialist recommends the right system for your environment.Talk to a specialist →

Data center map

Tap the numbers to see the priority system for each area.

3D map of a data center with six numbered areas
Choose an areaTap a number on the map to see the problem, the recommended system and the layers.
0/6 areas viewed

Built for data center routines

Without stopping operations

Low-VOC, high-solids, fast-drying products that fit short maintenance windows.

Built to last

Anticorrosion systems with an expected life of 15 to 25 years, depending on the combination and the exposure of the environment.

Less repainting

Fewer shutdowns, less waste and lower cost over the life of the facility.

Professional applying coating to a server rackProfessional inspecting a server aisle

Summary by area

AreaPriority system
IT / Server roomPassive fire protection for exposed steel beams and columns: SYLPYL 3480
Battery room (UPS)High chemical-resistance epoxy floor: W-POXI HSS 301 + W-POXI HBA 301; Structures and racks: W-POXI ERP 322 and WEGPOXI CVD 323
Electrical substation / Generator roomC3/C4 anticorrosion systems: W-POXI ZSP 315 N1277, WEGPOXI CVD 323 and WEGTHANE HPA 501; Passive fire protection for structural steel: SYLPYL 3480
Mechanical room / HVAC-RHERESHIELD WB-506 and Heresite P-413, for coils, heat exchangers and radiators; Thermal transfer loss below 1%; Support structures: WEGPOXI + WEGTHANE anticorrosion systems
Corridors and technical circulationEpoxy floors for light to medium traffic: W-POXI HSS 301 + W-POXI DFA 301
Outdoor areas and metal structuresC4/C5 systems: zinc-rich primer W-POXI ZSP 315; Epoxy intermediate: WEGPOXI CVD 323; Aliphatic acrylic PU finish: WEGTHANE HPA 501

Talk to a WEG Coatings specialist

Tell us what you need to protect and get the system recommendation.

  1. You tell us what you need to protect.
  2. A WEG Coatings specialist recommends the system for your environment.
  3. You get the guidance and the full catalog (in Portuguese).

Get contact from the representative in your region

Tell us what you need to protect and get the recommendation of the ideal system for your environment. To forward your request to the representative in your region, please provide your company tax ID, city and country.

We use your data to forward your request to the representative in your region and to send communications about WEG Coatings solutions. You can change your permissions at any time. To learn more about privacy, see the WEG Privacy Policy.

Your data is safe with us.

Frequently asked questions about data center coatings

Which coating should be used on a data center floor?

A layered epoxy system, always with the W-POXI HSS 301 sealer as the base. For light to medium traffic, the W-POXI DFA 301 finish; for moderate traffic, the W-POXI HBA 301 high-build self-leveling layer; for heavy traffic, HSS 301 + W-POXI PRR 301 repair primer + HBA 301. Anti-slip versions are available for ramps and wet areas. The final choice depends on traffic and environment.

How to protect a data center's metal structure from corrosion?

With an epoxy primer (W-POXI ERP 322) or a zinc-rich primer (W-POXI ZSP 315, for C4 and C5 environments) and an aliphatic PU finish (WEGTHANE HPA 501), which is UV-resistant. In C4 and C5 environments, the W-POXI ZSP 315 + WEGPOXI CVD 323 + WEGTHANE HPA 501 combination has an expected life of 15 to 25 years, depending on the exposure.

What is intumescent paint and what is it used for in data centers?

It is a paint that expands under heat and forms a layer that slows the heating of steel, as part of passive fire protection. WEG Coatings offers SYLPYL 3480 in solvent-based (SB) and water-based (WB) versions. Resistance time depends on thickness and project design.

How to protect HVAC-R coils from corrosion?

With coil-specific coatings, such as HERESHIELD WB-506 (water-based acrylic) and Heresite P-413 (oven-cured phenolic epoxy, for C5 environments). They protect against corrosion with thermal transfer loss below 1%.

In which data center areas does WEG Coatings operate?

IT rooms, substations and generator rooms, battery room (UPS), HVAC-R cooling, technical corridors, floors, and exposed outdoor areas and metal structures.

Data and recommendations follow the official catalog. Confirm the ideal system with the technical team.

Hi! I'm Wendy! Need help choosing the right coating? Talk to us!